Wired4Signs will showcase a wide range of products at the upcoming Sign Africa and FESPA Africa Expo, taking place from 13-15 September at Gallagher Convention Centre.
Solutions being displayed include:
LED Strips
The company has built up one of the largest selections of LED strip lighting for the retail, architectural, residential and commercial industries over the past 14 years. Its LED strip lights are manufactured to meet international standards by the company’s trusted suppliers from all over the world. All of the products are sold with a minimum three year warranty.
LED Modules
LED Modules are Wired4Sign’s full-proof solution for many applications but mainly built for the signage industry. Whether it be billboards, lightboxes, fabricated letters, vacuum formed signs or retail applications, the products give optimal illumination at the lowest cost with the best power consumption and longest lifespan.
Aluminium Profiles
The company offers over 48 unique types of LED lighting profiles. This range continues to grow by almost 10 new types each year. LED strips, modules or bars are mounted inside the aluminium channel with a clip-on cover/diffuser, endcaps, clips and even suspension kits, which together have the potential to form a complete luminaire. The aluminium provides a heat sink essential to ensure the performance and longevity of high-powered LED lighting. Together with the cover, they provide impact and dust protection as well as amazing aesthetics.
AB200
This is a clear two part glue that is renowned for its versatility and can bond a wide variety of substrates to plastic, without the need for surface primers or conditioners. Typical examples of applications include bonding polycarbonate letters in the sign industry, repairing polycarbonate headlights, bonding outdoor lighting lenses and fixtures and assembling electric metre housings and covers.
Stud Mount Letter Fixings
These are normally referred to as spacers or standoffs and they are used behind a sign to either space the sign off of the wall or to make provision for the mounting of LED’s behind the sign to create a ‘halo illumination’ effect. The studs are bonded to the letters with the correct adhesive. The letter is then positioned and marks indicated for the studs. Stud cups are then firmly fixed to the surface. Depending on the size of the letter fixings used, the letters are spaced with a stand-off of up to 25mm from the backdrop surface. For smaller applications, 16mm and 10mm are also available.
Sika Products
These can be used for:
– Signage (bonding acrylic to aluminium and aluminium composite materials).
– Marine (structural bonding and sealing below water-line, UV exposed areas, deck to hull, teak deck bonding and caulking).
– Automotive (car windscreens, panel bonding, bus manufacture, truck trailers, aluminium trailers).
– Construction (waterproofing, glass glazing and bonding, wooden deck bonding).
– Refrigeration (refrigerated rooms and trucks).
– Engineering (bonding stainless steel, galvanised steel and aluminium sheets).
Tridonic Agilight Products
These are a premium brand of LED products. They are manufactured with the highest quality LED chips from only one BIN. They have the highest efficiency, reliability, colour consistency and rendering of all of Wired4Signs’ brands. Typical specifications include a five year warranty, double insulation and European EMC standard for lighting compliance, with a water proof and non-water proof range.
LTECH
These are the company’s main brand of LED Dimmers, controllers, decoders and other LED control gear. With this range of products Wired4Signs is able to control LED’s wirelessly via remote control, WiFi, DMX or other types of control signals.
For more information, and to register online, visit www.signafricaexpo.com or www.fespaafrica.com.
WIRED4SIGNS 021 201 0303 ashle@w4s.co.za www.wired4signs.co.za
