In this video, JG Electronics’ Sindie Vermaak demonstrates how to print on a face mask using a heat press.
Materials:
– White polyester.
– Heat press.
– Dye-sublimation paper (printed on sublimation printer with dye-sublimation ink).
– Cardboard.
– Silicone paper.
– Teflon sheet.
Method:
– Fold the mask in half and place on top of the base of the heat press.
– Place the cardboard inside the mask for protection.
– Pre-press the mask to get rid of moisture and wrinkles, then place the silicone paper on top of the mask to protect it.
– When ready, place the silicone paper on the elastic straps.
– Place the cut-out print facing down on the mask, and ensure the print is bigger than the mask so that it covers the whole area.
– Press for 90 seconds at 190 degrees Celsius, using medium to high pressure.
– Flip the mask around so the other half can be printed on. Repeat the process, but remember to clean the press and the ink off the silicone paper first.
To submit your news please, contact journo@practicalpublishing.co.za
Read the top 5 stories weekly on WhatsApp or sign up to our newsletter.
JG ELECTRONICS
(+27 11) 789 6033
https://www.jgelectronics.com/
